How Products Are Developed A key component of product development is mold design. The relationship between product and mold design is such that both product and mold design engineers will benefit from knowledge of the design and production of plastics…
[toc] For a design to be successful, all the necessary information must be available before beginning. If this simple rule is ignored, many bad things can happen, such as poor designs, misunderstandings, poor component quality, and disputes between suppliers and…
As a result of injection blow molding, injection molding and blow molding are combined. It is possible to use either a vertical or a horizontal plastifier to convey the thermoplastic resin from its hopper and and mix it into a…
An injection molding operation is a process by which plastic materials molten in a mold are injected, and then cooled down, in order to achieve molded products. Methods such as this are suitable for mass-producing products with complex shapes, and…
I’m here to tell you that injection molding is really not as hard as it sounds. It’s quite easy, actually. Once you know what you’re doing, of course. If you want injection molded products for your project, but don’t have…
Side Cores What are the best methods for releasing severe threads or cuts? Do side cores, splits, or other methods work? In addition to the added complexity of the mold structure, adding any of these features will significantly increase the…
Surface Finish of Injection Molding Molded components are prevalent in nearly every industry, from highly aesthetic housings to internal components which do not require fine polishing. Individuals do not pay much attention to how the surface of these components is…
The selection of the correct provider is essential in the process of manufacturing products with the injection mold. In order to warrant the smoothest project possible you must make sure you ask the right questions and help in providing complete…
Injection Molding Material Drying [toc] In some materials, moisture can be absorbed by them from the atmosphere, which can cause the material to hygroscopic. When relatively damp materials are injected into a mould, they become splashed, splayed, or cast with…
An Overview of the Use of Plastic Products We need to look at how the polymer pellets are produced to understand the full life cycle of the process. It is at the stage of production that the overall process of…
EN 
IT 
ES 
DE 
FR 
PT